Carding Process in the Manufacuring of Jute

After the softening process in the manufacturing of jute, the fibers are about six feet long, and are passed onto the breaker card, where they are reduced in length, finely divided, thoroughly mixed, cleared of impurities, and laid in parallel order. The chief features of the card are a cylinder about four feet in diameter covered with wooden staves filled with steel teeth, and around this cylinder a number of smaller cylinders, known as strippers and workers, also covered with steel teeth. The jute fibers are carried around the large cylinder, being finely divided by the workers and strippers in their course. A doffer roller then strips the elongated lap from the main cylinder and sends it down a broad channel, which compresses it to a strand or sliver about four inches wide. Twelve of these slivers are then fed into the finisher card, which is similar to the breaker, but has finer teeth, and are drawn out into a finer, smoother strand.

Downloads