"An eccentric on the main shaft gives an oscillating motion to a circular disc called the wrist plate, pivoted at the center of the cylinder. It transmits motion to each of the four valves through adjustable links known as steam rods or exhaust rods, according to whether they move the admission or exhaust valves." —Derr, 1911

Steam Engine with Reynolds Corliss Gear

"An eccentric on the main shaft gives an oscillating motion to a circular disc called the wrist plate,…

"The governor cam rod operates a plate cam having a curved slot so shaped that it takes place of both the knock—off and the safety cam. The steam arm is keyed to the valve spindle and carries at its lower end a steel die which is free to slip up and down a small amount." —Derr, 1911

Steam Engine Brown Releasing Gear

"The governor cam rod operates a plate cam having a curved slot so shaped that it takes place of both…

"The steam arm is keyed to the valve spindle which passes loosely through a bracket on which the bell—crank lever turns, and the spindle is packed to make a steam—tight joint where it enters the cylinder. Motion of the steam rod toward the right will turn the bell—crank lever and raise the hook stud." —Derr, 1911

Close up of Reynolds Corliss Gear from Steam Engine

"The steam arm is keyed to the valve spindle which passes loosely through a bracket on which the bell—crank…

"The main valve controls admission, release, and compression; the other (valve) regulates the cut—off only, which may be changed without in any way affecting the other events of the stroke. This cut—off valve may be placed in a separate valve chest, or it may be placed in the back of the main valve." —Derr, 1911

Close up View of Double Sliding Valve Gears from Steam Engine

"The main valve controls admission, release, and compression; the other (valve) regulates the cut—off…

An illustration of a Corliss steam engine to generate 5000 kW of electricity. The turbines to create electricity is located on the right hand side and the large circular casing in the left. The steam enters the system at a high pressure to turn the turbines.

5000 kW Corliss and Curtis Steam Engine for Electric Generation

An illustration of a Corliss steam engine to generate 5000 kW of electricity. The turbines to create…

"All fly—wheel governors operate by shifting the eccentric either to change the angular advance, the travel of the valve, or both. The principle of a governor arranged to give decreasing lead under the head of governors." —Derr, 1911

Top View of the Fly Wheel Governor Turning Clockwise

"All fly—wheel governors operate by shifting the eccentric either to change the angular advance,…