ClipArt ETC
A small instrument of various forms and sizes, for boring.

Bit

A small instrument of various forms and sizes, for boring.

"Block shears act with additional leverage, and can consequently be used for rather thicker metal, the upper bow being replaced by a long straight handle, and the lower one by a stake which can by firmly fixed in a block of woood or otherwise." — Encyclopedia Britannica, 1893

Block Shears

"Block shears act with additional leverage, and can consequently be used for rather thicker metal, the…

"The bradawl is a boring tool adapted only for soft wood." — Encyclopedia Britannica, 1893

Bradawl

"The bradawl is a boring tool adapted only for soft wood." — Encyclopedia Britannica, 1893

"Cutting pliers and cutting nippers have a pair of knife edges so arranged as to work exactly opposite to one another, the handles, on being tightly grasped, affording sufficient leverage for these edges to be forced to a short distance into the two opposite sides of a nail or wire, which, if of small diameter or of soft metal, can thus be cut asunder." — Encyclopedia Britannica, 1893

Cutting Pliers

"Cutting pliers and cutting nippers have a pair of knife edges so arranged as to work exactly opposite…

A shaftlike tool with two or more cutting edges for making holes in firm materials, esp. by rotation.

Machine for Drilling

A shaftlike tool with two or more cutting edges for making holes in firm materials, esp. by rotation.

"The Gimlet." — Encyclopedia Britannica, 1893

Gimlet

"The Gimlet." — Encyclopedia Britannica, 1893

"The Gimlet." — Encyclopedia Britannica, 1893

Gimlet

"The Gimlet." — Encyclopedia Britannica, 1893

"A form of glass cutter with a cast-iron handle." — Encyclopedia Britannica, 1893

Glass Cutter

"A form of glass cutter with a cast-iron handle." — Encyclopedia Britannica, 1893

"Where the lathe has no special taper turning attachment, the rig here described can readily be made and applied. The hand wheel of the cross feed is removed, and replaced by a hard—wood disk S that has a rim groove for a stout cord A. One end of this cord is attached to the tail stock at B, by means of a bent metal strip D. The conicity or degree of taper will be determined by the diameter of the disk S." —Grimshaw, 1902

Taper Turning and Boring Lathe Rig

"Where the lathe has no special taper turning attachment, the rig here described can readily be made…

"A ratchet brace is a powerful instrument, and carries in itself the screw for obtaining the requisite pressure. Small holes can be drilled under a light pressure with rapid rotation on the part of the drill." — Encyclopedia Britannica, 1893

Ratchet Brace

"A ratchet brace is a powerful instrument, and carries in itself the screw for obtaining the requisite…

"The ordinary sheet-metal shears merely resemble very powerful scissors, and, their action being quite local, they serve well for dividing the plates or other thin sheets for which alone they are suitable." — Encyclopedia Britannica, 1893

Sheet-metal Shears

"The ordinary sheet-metal shears merely resemble very powerful scissors, and, their action being quite…

"The wood-worker's main stand-by for boring is the stock or brace and set of bits." — Encyclopedia Britannica, 1893

Stock

"The wood-worker's main stand-by for boring is the stock or brace and set of bits." — Encyclopedia…

A stock used to tighten and loosen bolts.

Stock

A stock used to tighten and loosen bolts.