ClipArt ETC
"This attachment, which may be readily affixed to any lathe, consists of a lever that is attached to a crank shaft, which latter has its bearings on the slide rest. From the crank there is a connecting rod which goes to the slide rest. By means of the lever the rest can be moved to and fro on condition that it is free from the cross feed." —Grimshaw

Cam Turning Attachment for Lathe

"This attachment, which may be readily affixed to any lathe, consists of a lever that is attached to…

A planer is a type of metalworking machine tool that is analogous to a shaper, but larger, and with the entire workpiece moving beneath the cutter, instead of the cutter moving above a stationary workpiece. The work table is moved back and forth on the bed beneath the cutting head either by mechanical means, such as a rack and pinion gear, or by a hydraulic cylinder.

Iron Planer

A planer is a type of metalworking machine tool that is analogous to a shaper, but larger, and with…

A face plate for milling on a lathe. The circular blades used for milling can be adjusted by using loosening or tightening the nuts for different cuts.

Relieving Milling Cutters Lathe

A face plate for milling on a lathe. The circular blades used for milling can be adjusted by using loosening…

A spiral milling apparatus for a lathe to create drills and flutes. The working surface is fastened to the lathe by the bolt on the left. While the rod is spinning, a spindle is inserted in a hole at a desired angle.

Spiral Milling Lathe

A spiral milling apparatus for a lathe to create drills and flutes. The working surface is fastened…

An endless narrow band or ribbon of steel with a serrated edge, passing over two large wheels, which give a continous uniform motion.

Band Saw

An endless narrow band or ribbon of steel with a serrated edge, passing over two large wheels, which…

"Screw-punch. a, bed; b, yoke, on the inner sides of which are slides for the cross-head c; d, the punch proper; e, nut for the screw; f, weighted lever by which the screw is made to exert its power upon the punch d." -Whitney, 1911

Screw Punch

"Screw-punch. a, bed; b, yoke, on the inner sides of which are slides for the cross-head c; d, the punch…