ClipArt ETC
After the carding process in the manufacturing of jute is completed, the jute is taken into the drawing frames, whose function is to draw out the sliver, by means of rollers, to a smaller size, and to straighten or comb the fiber, so as to make it spin into a strong and level thread. Four of the slivers from the finisher cards are put through he first drawing frame, and are discharged by it in one small sliver. Two of these slivers are hen put through a second and finer drawing frame, and further combed and drawn out into one end. The cans of slivers are then taken to the roving frames to continue the manufacturing process.

Drawing Process in the Manufacturing of Jute

After the carding process in the manufacturing of jute is completed, the jute is taken into the drawing…

After being drawn through the drawing frames during the manufacturing process, the jute slivers are put into cans, which are then taken to the roving frames, where the material is again drawn out, twisted, and wound on to the rove bobbins. The latter are taken to spinning frames for the final manufacturing process.

Roving Process in the Manufacturing of Jute

After being drawn through the drawing frames during the manufacturing process, the jute slivers are…

In the last step of the manufacturing process of the jute plant, the material is taken on bobbins to spinning frames of the throstle type, and spun into yarn of various sizes, with a hard twist for warps and a softer twist for wefts. The warp yarns on bobbins are then passed on to the spooling and dressing machines, or are reeled in hanks and bundles for the purpose of being bleached or dyed in various colors for stripes in the fabric to be woven. The weft yarns are taken to the cop winding machines.

Spinning Process in the Manufacturing of Jute

In the last step of the manufacturing process of the jute plant, the material is taken on bobbins to…

"This, which is the last required before the operations of spinning, strictly so called, commence, resembles in principle the slubbing and intermediate frames. It has a greater number of spindles than either, seldom less than 100, and often 164; and these spindles are set close together, and the bobbins are shorter and smaller than in the intermediate frame." — Encyclopedia Britannica, 1893

Roving Frame

"This, which is the last required before the operations of spinning, strictly so called, commence, resembles…