Roving Process in the Manufacturing of Jute

| View Cart ⇗ | Info

After being drawn through the drawing frames during the manufacturing process, the jute slivers are put into cans, which are then taken to the roving frames, where the material is again drawn out, twisted, and wound on to the rove bobbins. The latter are taken to spinning frames for the final manufacturing process.


John H. Finley ed. Nelson's Perpetual Loose-Leaf Encyclopaedia (vol. 7) (New York, NY: Thomas Nelson and Sons, 1917) 47


TIFF (full resolution)

3300×3028, 506.1 KiB

Large GIF

1024×939, 186.8 KiB

Medium GIF

640×587, 97.4 KiB

Small GIF

320×293, 34.5 KiB